adamflott.com

media-odroid

Description: media-odroid System Information
Authored: 2022-06-01;
Permalink: https://adamflott.com/systems/media-odroid/
categories : systems;


Table of Contents

generated 2022-06-01 12:41

Command 'ssh root@media-odroid cat /etc/motd'

##############################################
#                  CoreELEC                  #
#            https://coreelec.org            #
##############################################

CoreELEC (official): 19.5-Matrix_rc1 (Amlogic-ng.arm)

Command 'ssh root@media-odroid uname -a'

Linux CoreELEC 4.9.269 #1 SMP PREEMPT Thu Apr 28 10:13:57 CEST 2022 aarch64 GNU/Linux

Command 'ssh root@media-odroid dmesg'

[    0.000000@0]d Booting Linux on physical CPU 0x0
[    0.000000@0]d Linux version 4.9.269 (portisch@ubuntu) (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) ) #1 SMP PREEMPT Thu Apr 28 10:13:57 CEST 2022
[    0.000000@0]d Boot CPU: AArch64 Processor [410fd034]
[    0.000000@0]d CoreELEC dt-id: g12b_s922x_odroid_n2
[    0.000000@0]d Machine model: Hardkernel ODROID-N2
[    0.000000@0]d 	07400000 - 07500000,     1024 KB, ramoops@0x07400000
[    0.000000@0]d __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[    0.000000@0]d 	05000000 - 05400000,     4096 KB, linux,secmon
[    0.000000@0]d __reserved_mem_alloc_size, start:0x0000000077800000, end:0x0000000078000000, len:8 MiB
[    0.000000@0]d 	77800000 - 78000000,     8192 KB, linux,meson-fb
[    0.000000@0]d 	e5800000 - ed800000,   131072 KB, linux,ion-dev
[    0.000000@0]d 	e3c00000 - e5800000,    28672 KB, linux,ion-fb
[    0.000000@0]d Reserved memory: created DMA memory pool at 0x00000000e3c00000, size 0 MiB
[    0.000000@0]d 	e3c00000 - e3c00000,        0 KB, linux,ppmgr
[    0.000000@0]d 	b8c00000 - d3c00000,   442368 KB, linux,codec_mm_cma
[    0.000000@0]d 	e3c00000 - e3c00000,        0 KB, linux,codec_mm_reserved
[    0.000000@0]d 	e2c00000 - e3c00000,    16384 KB, linux,galcore
[    0.000000@0]d cma: Reserved 8 MiB at 0x00000000e2400000
[    0.000000@0]d On node 0 totalpages: 972800
[    0.000000@0]d   DMA zone: 15200 pages used for memmap
[    0.000000@0]d   DMA zone: 0 pages reserved
[    0.000000@0]d   DMA zone: 972800 pages, LIFO batch:31
[    0.000000@0]d psci: probing for conduit method from DT.
[    0.000000@0]d psci: PSCIv1.0 detected in firmware.
[    0.000000@0]d psci: Using standard PSCI v0.2 function IDs
[    0.000000@0]d psci: MIGRATE_INFO_TYPE not supported.
[    0.000000@0]d psci: SMC Calling Convention v1.1
[    0.000000@0]d percpu: Embedded 21 pages/cpu s47576 r8192 d30248 u86016
[    0.000000@0]d pcpu-alloc: s47576 r8192 d30248 u86016 alloc=21*4096
[    0.000000@0]d pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 
[    0.000000@0]d Detected VIPT I-cache on CPU0
[    0.000000@0]d CPU features: enabling workaround for ARM erratum 845719
[    0.000000@0]d Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 957600
[    0.000000@0]d Kernel command line: BOOT_IMAGE=kernel.img boot=UUID=2911-4504 disk=UUID=d64f1eca-7a63-4904-9030-3446e096b23b console=ttyS0,115200 console=tty0 no_console_suspend keymap=us     remotewakeup=0x23dc4db2 decode_type=0 remotewakeupmask=0xffffffff     vout=1080p60hz,en logo=osd0,loaded,0x3d800000 frac_rate_policy=0 native_4k_gui=0 hdr_policy=1 quiet  systemd.show_status=auto
[    0.000000@0]d vout: 1080p60hz
[    0.000000@0]d vout: en: 1
[    0.000000@0]d fb: osd0
[    0.000000@0]d fb: loaded
[    0.000000@0]d fb: 0x3d800000
[    0.000000@0]d am_vecm: boot hdr_policy: 1
[    0.000000@0]d PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000@0]d Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000@0]d Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000@0]d Memory: 3143656K/3891200K available (13182K kernel code, 2072K rwdata, 9864K rodata, 5056K init, 1430K bss, 137240K reserved, 610304K cma-reserved)
[    0.000000@0]d Virtual kernel memory layout:
[    0.000000@0]d     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000@0]d     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
[    0.000000@0]d       .text : 0xffffff8009080000 - 0xffffff8009d60000   ( 13184 KB)
[    0.000000@0]d     .rodata : 0xffffff8009d60000 - 0xffffff800a710000   (  9920 KB)
[    0.000000@0]d       .init : 0xffffff800a710000 - 0xffffff800ac00000   (  5056 KB)
[    0.000000@0]d       .data : 0xffffff800ac00000 - 0xffffff800ae06008   (  2073 KB)
[    0.000000@0]d        .bss : 0xffffff800ae06008 - 0xffffff800af6bb9c   (  1431 KB)
[    0.000000@0]d     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
[    0.000000@0]d     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
[    0.000000@0]d     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
[    0.000000@0]d               0xffffffbf00000000 - 0xffffffbf03b60000   (    59 MB actual)
[    0.000000@0]d     memory  : 0xffffffc000000000 - 0xffffffc0ed800000   (  3800 MB)
[    0.000000@0]d SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000@0]d Preemptible hierarchical RCU implementation.
[    0.000000@0]d 	Build-time adjustment of leaf fanout to 64.
[    0.000000@0]d 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000@0]d RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000@0]d NR_IRQS:64 nr_irqs:64 0
[    0.000000@0]d irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
[    0.000000@0]d g12a_aoclkc_init: register ao clk ok!
[    0.000000@0]d chip version = 29:A - 40:0
[    0.000000@0]d meson_g12a_sdemmc_init: register amlogic sdemmc clk
[    0.000000@0]d meson_g12a_sdemmc_init: register amlogic sdemmc clk
[    0.000000@0]d meson_g12a_gpu_init: register meson gpu clk
[    0.000000@0]d meson_g12a_media_init: register meson media clk
[    0.000000@0]d meson_g12a_misc_init: register amlogic g12a misc clks
[    0.000000@0]d meson_g12a_misc_init: done.
[    0.000000@0]d g12a_clkc_init initialization complete
[    0.000000@0]d arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000@0]d clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000004@0]d sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000037@0]d meson_bc_timer: mclk->mux_reg =        (ptrval),mclk->reg =        (ptrval)
[    0.000529@0]- Console: colour dummy device 80x25
[    0.000616@0]- console [tty0] enabled
[    0.000629@0]- Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000636@0]- pid_max: default: 32768 minimum: 301
[    0.000724@0]- Security Framework initialized
[    0.000730@0]- SELinux:  Initializing.
[    0.000759@0]- SELinux:  Starting in permissive mode
[    0.000787@0]- Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.000793@0]- Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.001413@0]- ftrace: allocating 42178 entries in 165 pages
[    0.076508@0]- sched-energy: Sched-energy-costs installed from DT
[    0.088158@0]- ASID allocator initialised with 65536 entries
[    0.126851@0]- secmon: clear_range:5100000 200000
[    0.172753@1]d Detected VIPT I-cache on CPU1
[    0.172802@1]d CPU1: Booted secondary processor [410fd034]
[    0.205277@2]d Detected VIPT I-cache on CPU2
[    0.205320@2]d CPU2: Booted secondary processor [410fd092]
[    0.236829@3]d Detected VIPT I-cache on CPU3
[    0.236852@3]d CPU3: Booted secondary processor [410fd092]
[    0.268886@4]d Detected VIPT I-cache on CPU4
[    0.268908@4]d CPU4: Booted secondary processor [410fd092]
[    0.300947@5]d Detected VIPT I-cache on CPU5
[    0.300969@5]d CPU5: Booted secondary processor [410fd092]
[    0.301054@0]- Brought up 6 CPUs
[    0.301060@0]- SMP: Total of 6 processors activated.
[    0.301066@0]- CPU features: detected feature: 32-bit EL0 Support
[    0.301185@0]- CPU: All CPU(s) started at EL2
[    0.301222@0]d alternatives: patching kernel code
[    0.302681@4]- devtmpfs: initialized
[    0.310371@4]- clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.310381@4]- futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.310485@4]- pinctrl core: initialized pinctrl subsystem
[    0.311209@4]- NET: Registered protocol family 16
[    0.311569@4]- schedtune: init normalization constants...
[    0.311575@4]- schedtune: CLUSTER[0-1]      min_pwr:     0 max_pwr:    42
[    0.311579@4]- schedtune: CPU[0]            min_pwr:     0 max_pwr:   279
[    0.311582@4]- schedtune: CPU[1]            min_pwr:     0 max_pwr:   279
[    0.311585@4]- schedtune: CLUSTER[2-5]      min_pwr:     0 max_pwr:    64
[    0.311588@4]- schedtune: CPU[2]            min_pwr:     0 max_pwr:   759
[    0.311590@4]- schedtune: CPU[3]            min_pwr:     0 max_pwr:   759
[    0.311593@4]- schedtune: CPU[4]            min_pwr:     0 max_pwr:   759
[    0.311595@4]- schedtune: CPU[5]            min_pwr:     0 max_pwr:   759
[    0.311597@4]- schedtune: SYSTEM            min_pwr:     0 max_pwr:  3700
[    0.311600@4]- schedtune: using normalization constants mul: 459677581 sh1: 1 sh2: 11
[    0.311601@4]- schedtune: verify normalization constants...
[    0.311604@4]- schedtune: max_pwr/2^0: 3700 => norm_pwr:  1024
[    0.311606@4]- schedtune: max_pwr/2^1: 1850 => norm_pwr:   512
[    0.311607@4]- schedtune: max_pwr/2^2:  925 => norm_pwr:   256
[    0.311609@4]- schedtune: max_pwr/2^3:  462 => norm_pwr:   127
[    0.311611@4]- schedtune: max_pwr/2^4:  231 => norm_pwr:    63
[    0.311613@4]- schedtune: max_pwr/2^5:  115 => norm_pwr:    31
[    0.311614@4]- schedtune: configured to support global boosting only
[    0.324991@0]- cpuidle: using governor menu
[    0.325131@0]- register canvas platform driver
[    0.325164@0]- register rdma platform driver
[    0.325708@0]- vdso: 2 pages (1 code @         (ptrval), 1 data @         (ptrval))
[    0.325722@0]- hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.327197@0]- DMA: preallocated 2048 KiB pool for atomic allocations
[    0.327385@0]- clkmsr: clkmsr: driver init
[    0.327388@0]- codec_mm_module_init
[    0.327431@0]- media_configs_system_init
[    0.327857@0]- pstore: using zlib compression
[    0.327922@0]- console [pstore-1] enabled
[    0.327925@0]- pstore: Registered ramoops as persistent store backend
[    0.327928@0]- ramoops: attached 0x100000@0x7400000, ecc: 0/0
[    0.329598@0]- meson_mhu: mhu ffffffc0dd044810 to scp done 0x1
[    0.329751@0]- aml_iomap: amlogic iomap probe done
[    0.330143@0]- vpu: driver version: v20210916(8-g12b)
[    0.330150@0]- vpu: load vpu_clk: 666666667Hz(7)
[    0.330314@0]- vpu: clktree_init
[    0.330368@0]- vpu: vpu_probe OK
[    0.334757@0]- clkmsr: msr_clk_reg0=        (ptrval),msr_clk_reg2=        (ptrval)
[    0.334767@0]- clkmsr ffd18004.meson_clk_msr: failed to get msr ring reg0
[    0.337431@0]- audio_clocks: audio_clocks_probe done
[    0.339837@0]- aml_vdac_config_probe: cpu_id:4, name:meson-g12ab-vdac
[    0.340028@0]- aml_vdac_probe: ok
[    0.340196@0]- canvas_probe reg=        (ptrval),size=2000
[    0.340211@0]- canvas maped reg_base =        (ptrval)
[    0.342330@0]- rdma_probe,cpu_type:0, ver:0, len:8,rdma_table_size:65536
[    0.342582@0]- rdma_register, rdma_table_addr         (ptrval) rdma_table_addr_phy e2600000 reg_buf         (ptrval)
[    0.342586@0]- rdma_register success, handle 1 table_size 65536
[    0.342589@0]- set_rdma_handle video rdma handle = 1.
[    0.342631@0]- classs created ok
[    0.342640@0]- classs file created ok
[    0.343649@0]- aml_snd_reg_map[0], reg:ff640000, size:2000
[    0.343662@0]- aml_snd_reg_map[1], reg:ff642000, size:2000
[    0.343670@0]- aml_snd_reg_map[2], reg:ff64a000, size:2000
[    0.343678@0]- aml_snd_reg_map[3], reg:ff656000, size:1800
[    0.343687@0]- aml_snd_reg_map[4], reg:ffd01000, size:1000
[    0.343689@0]- amlogic auge_snd_iomap probe done
[    0.346078@0]- cvbs_out: cvbsout_probe, cpu_id:4,name:meson-g12b-cvbsout
[    0.346206@0]- cvbs_out: clk path:0x0
[    0.346212@0]- cvbs_out: find performance_pal config
[    0.346219@0]- cvbs_out: register cvbs module server ok
[    0.346222@0]- cvbs_out: register cvbs module vout2 server ok
[    0.346227@0]- cvbs_out: chrdev devno 264241152 for disp
[    0.346434@0]- cvbs_out: create cdev cvbs
[    0.346438@0]- cvbs_out: cvbsout_probe OK
[    0.346724@0]- codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[    0.346817@0]- codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[    0.346820@0]- codec_mm_probe ok
[    0.486321@3]- SCSI subsystem initialized
[    0.486468@3]- libata version 3.00 loaded.
[    0.486626@3]- usbcore: registered new interface driver usbfs
[    0.486663@3]- usbcore: registered new interface driver hub
[    0.486689@3]- usbcore: registered new device driver usb
[    0.486774@3]- pps_core: LinuxPPS API ver. 1 registered
[    0.486777@3]- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.486790@3]- PTP clock support registered
[    0.487130@3]- secmon: reserve_mem_size:0x300000
[    0.487192@3]- secmon secmon: assigned reserved memory node linux,secmon
[    0.487357@3]- secmon: get page:        (ptrval), 5000
[    0.487361@3]- secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[    0.487363@3]- secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[    0.487494@3]- fb: osd_init_module
[    0.487746@3]- fb: viu vsync irq: 34
[    0.487755@3]- fb: viu2 vsync irq: 47
[    0.487762@3]- fb: rdma irq: 46
[    0.487942@3]- fb: osd_rdma_init: rdma_table p=0xe2610000,op=0xe2610000 , v=0x        (ptrval)
[    0.487965@3]- rdma_register, rdma_table_addr         (ptrval) rdma_table_addr_phy e2611000 reg_buf         (ptrval)
[    0.487967@3]- rdma_register success, handle 2 table_size 4096
[    0.487969@3]- fb: osd_rdma_init:osd rdma handle = 2.
[    0.487978@3]- fb: mem_size: 0x800000
[    0.487979@3]- fb: mem_size: 0x4b80000
[    0.487980@3]- fb: mem_size: 0x100000
[    0.487982@3]- fb: mem_size: 0x100000
[    0.487983@3]- fb: mem_size: 0x800000
[    0.488018@3]- meson-fb meson-fb: assigned reserved memory node linux,meson-fb
[    0.488021@3]- fb: reserved memory base:0x0000000077800000, size:800000
[    0.488108@3]- fb: init fbdev bpp is:32
[    0.488868@3]- fb: set osd0 reverse as NONE
[    0.495619@3]- fb: osd probe OK
[    0.496089@3]- hdmitx: system: Ver: 20210902
[    0.496179@3]- hdmitx: system: hpd irq = 33, viu1_vsync = 34
[    0.496588@3]d vpu: switch_vpu_mem_pd: unsupport vpu mod: 63
[    0.496592@3]- hdmitx: hw: alread display in uboot 0x10
[    0.496617@3]- hdmitx: hw: avmute set to 1
[    0.496657@3]- hdmitx: hdmitx_uboot_audio_en[604] data = 0xf
[    0.497268@0]h hdmitx: system: irq 80000004 0
[    0.497986@3]- hdmitx: hdmitx_set_current_vmode[5445]
[    0.497989@3]- hdmitx: system: recalc before 1080p60hz 60 1, frac 0
[    0.497993@3]- hdmitx: system: recalc after 1080p60hz 60 1, frac 0
[    0.497994@3]- hdmitx: alread display in uboot
[    0.497996@3]- hdmitx: system: update rx hdr info 0
[    0.497999@3]- vout: init mode 1080p60hz set ok
[    0.498002@3]- fb: current vmode=1080p60hz, cmd: 0x60000
[    0.498004@3]- vout: aml_vout_probe OK
[    0.498228@3]- chip type:0x29
[    0.498252@3]- can't find sec_base, set bytes_per_cycle to 16
[    0.498520@3]- Advanced Linux Sound Architecture Driver Initialized.
[    0.501409@0]- hdmitx: system: update rx hdr info 0
[    0.501413@0]- hdmitx: system: plugout
[    0.501418@0]- hdmitx: hw: alread display in uboot 0x10
[    0.501420@0]- hdmitx: system: update rx hdr info 0
[    0.501426@0]- hdmitx: system: update physical size: 16 9
[    0.501434@0]- hdmitx: hw: avmute set to 2
[    0.505170@3]- NetLabel: Initializing
[    0.505173@3]- NetLabel:  domain hash size = 128
[    0.505174@3]- NetLabel:  protocols = UNLABELED CIPSOv4
[    0.505207@3]- NetLabel:  unlabeled traffic allowed by default
[    0.505656@3]- clocksource: Switched to clocksource arch_sys_counter
[    0.538047@3]- VFS: Disk quotas dquot_6.6.0
[    0.538086@3]- VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.538145@3]- FS-Cache: Loaded
[    0.543989@3]- NET: Registered protocol family 2
[    0.565735@3]- TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.565874@3]- TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.566060@3]- TCP: Hash tables configured (established 32768 bind 32768)
[    0.566105@3]- UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.566135@3]- UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.566262@3]- NET: Registered protocol family 1
[    0.566577@3]- RPC: Registered named UNIX socket transport module.
[    0.566580@3]- RPC: Registered udp transport module.
[    0.566582@3]- RPC: Registered tcp transport module.
[    0.566584@3]- RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.566589@3]- PCI: CLS 0 bytes, default 64
[    0.567841@3]- Unpacking initramfs...
[    0.584573@3]- Freeing initrd memory: 7176K
[    0.584986@3]- efusekeynum: 1
[    0.585006@3]- efusekeyname:            uuid	offset:     0	size:    32
[    0.585203@3]- efuse efuse: probe OK!
[    0.585633@3]- unifykey: aml_unifykeys_init done!
[    0.585983@3]- hw perfevents: clusterb_enabled = 1
[    0.585986@3]- hw perfevents: cpumasks 0x3, 0x3c
[    0.586003@3]- hw perfevents: cluster A irq = 10
[    0.586024@3]- hw perfevents: cluster B irq = 11
[    0.586067@3]- hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.588351@3]- audit: initializing netlink subsys (disabled)
[    0.588379@3]- audit: type=2000 audit(0.536:1): initialized
[    0.589004@3]- workingset: timestamp_bits=45 max_order=20 bucket_order=0
[    0.594691@3]- squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.595111@3]- FS-Cache: Netfs 'nfs' registered for caching
[    0.595524@3]- NFS: Registering the id_resolver key type
[    0.595540@3]- Key type id_resolver registered
[    0.595542@3]- Key type id_legacy registered
[    0.595550@3]- nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.595552@3]- nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.595680@3]- FS-Cache: Netfs 'cifs' registered for caching
[    0.596165@3]- SELinux:  Registering netfilter hooks
[    0.598684@3]- NET: Registered protocol family 38
[    0.598689@3]- Key type asymmetric registered
[    0.598693@3]- Asymmetric key parser 'x509' registered
[    0.598803@3]- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.598807@3]- io scheduler noop registered (default)
[    0.598809@3]- io scheduler deadline registered
[    0.598893@3]- io scheduler cfq registered
[    0.600589@4]d random: fast init done
[    0.600619@4]- random: crng init done
[    0.600645@3]- [drm] Initialized
[    0.600750@3]- Unable to detect cache hierarchy for CPU 0
[    0.603711@3]- loop: module loaded
[    0.604535@3]- mtdoops: mtd device (mtddev=name/number) must be supplied
[    0.604948@3]- libphy: Fixed MDIO Bus: probed
[    0.605434@3]- tx_amp_src not setup
[    0.605440@3]- no rst_mask setting
[    0.605441@3]- default enet type as 0
[    0.605445@3]- read auto_cali_idx fail
[    0.605448@3]- Not set  cali_val for REG1
[    0.605903@3]- meson6-dwmac ff3f0000.ethernet: no reset control found
[    0.605908@3]- stmmac - user ID: 0x11, Synopsys ID: 0x37
[    0.605909@3]-  Ring mode enabled
[    0.605911@3]-  DMA HW capability register supported
[    0.605913@3]-  Normal descriptors
[    0.605915@3]-  RX Checksum Offload Engine supported
[    0.605916@3]- 	COE Type 2
[    0.605918@3]-  TX Checksum insertion supported
[    0.605919@3]-  Wake-Up On Lan supported
[    0.605948@3]- eth%d: device MAC address 00:1e:06:42:45:9e
[    0.605950@3]-  Enable RX Mitigation via HW Watchdog Timer
[    0.608847@3]- libphy: stmmac: probed
[    0.608852@3]- eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
[    0.608855@3]- eth%d: PHY ID 001cc916 at 7 IRQ POLL (stmmac-0:07)
[    0.609847@3]- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.609850@3]- ehci-pci: EHCI PCI platform driver
[    0.609881@3]- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.609894@3]- ohci-pci: OHCI PCI platform driver
[    0.610183@3]- usbcore: registered new interface driver cdc_acm
[    0.610185@3]- cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.610220@3]- usbcore: registered new interface driver usb-storage
[    0.610278@3]- usbcore: registered new interface driver usbserial
[    0.610303@3]- usbcore: registered new interface driver usbserial_generic
[    0.610322@3]- usbserial: USB Serial support registered for generic
[    0.610534@3]- mousedev: PS/2 mouse device common for all mice
[    0.610734@3]- i2c /dev entries driver
[    0.611555@4]- ledtrig-cpu: registered to indicate activity on CPUs
[    0.611789@4]- hidraw: raw HID events driver (C) Jiri Kosina
[    0.611951@4]- usbcore: registered new interface driver usbhid
[    0.611952@4]- usbhid: USB HID core driver
[    0.612051@4]- cluster0 stock freq set to: 1896000
[    0.612056@4]- cluster1 stock freq set to: 1800000
[    0.612282@4]- meson_cpufreq_init: ignor dsu clk!
[    0.612285@4]- meson_cpufreq_init: ignor dsu pre parent clk!
[    0.612313@4]- value of voltage_tolerance 0
[    0.612315@4]- meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
[    0.612332@4]- value of gp1_clk_target 0
[    0.612808@4]- dvfs [meson_cpufreq_init] - cluster 0 freq 1992000
[    0.612817@4]- cpu cpu0: meson_cpufreq_init: CPU 0 initialized
[    0.614441@4]- meson_cpufreq_init: ignor dsu clk!
[    0.614445@4]- meson_cpufreq_init: ignor dsu pre parent clk!
[    0.614488@4]- value of voltage_tolerance 0
[    0.614490@4]- meson_cpufreq_init:don't find the node <dynamic_gp1_clk>
[    0.614503@4]- value of gp1_clk_target 0
[    0.614994@4]- dvfs [meson_cpufreq_init] - cluster 1 freq 1908000
[    0.614997@4]- dvfs [meson_cpufreq_init] - cluster 1 freq 2004000
[    0.615003@4]- cpu cpu2: meson_cpufreq_init: CPU 2 initialized
[    0.616440@4]- ff803000.serial: clock gate not found
[    0.616467@4]- meson_uart ff803000.serial: ==uart0 reg addr = 000000000fca27e4
[    0.616485@4]- ff803000.serial: ttyS0 at MMIO 0xff803000 (irq = 25, base_baud = 1500000) is a meson_uart
[    0.616493@4]- meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 0 to 115200
[    0.705703@4]- console [ttyS0] enabled
[    0.706201@4]- amlogic-new-usb2-v2 ffe09000.usb2phy: USB2 phy probe:phy_mem:0xffe09000, iomap phy_base:0xffffff80084d9000
[    0.706342@4]- amlogic-new-usb3-v2 ffe09080.usb3phy: USB3 phy probe:phy_mem:0xffe09080, iomap phy_base:0xffffff80084dd080
[    0.712456@4]- rtc-pcf8563 3-0051: rtc core: registered rtc-pcf8563 as rtc0
[    0.713985@4]- gpio-keypad: probe of ff800000.gpio_keypad failed with error -22
[    0.714791@4]- ion_dev soc:ion_dev: assigned reserved memory node linux,ion-dev
[    0.714804@4]- ion-dev: failed get fb memory
[    0.714812@4]- ion-dev: failed get secure memory
[    0.714911@4]- ion-dev: add heap type:0 id:0
[    0.714941@4]- ion-dev: add heap type:5 id:5
[    0.714957@4]- ion-dev: add heap type:4 id:4
[    0.714958@4]- ion-dev: dev_ion_probe, create 3 heaps
[    0.715015@4]- ge2d: ge2d_init_module
[    0.715285@4]- ge2d: ge2d clock is 499 MHZ
[    0.715296@4]- ge2d: reserved mem is not used
[    0.715316@4]- ge2d: ge2d start monitor
[    0.715529@4]- new arch is :0.
[    0.715572@4]- [tsync_pcr_init]init success.
[    0.715678@4]- amvideom vsync irq: 34, cpu_type:1
[    0.715693@4]- create_ge2d_work_queue video task ok
[    0.715967@4]- create_video_receiver video_render.0  00000000879a03b0, path_id:2 success
[    0.715969@4]- create_video_receiver video_render.1  000000009406a64d, path_id:3 success
[    0.716079@4]- amvideocap_probe,amvideocap
[    0.716103@4]- use cma buf.
[    0.717376@4]- hdmitx: hdcp: hdmitx_hdcp_init
[    0.717738@4]- vout: vout2: clktree_init
[    0.717785@4]- vout: vout2: init mode null set ok
[    0.717787@4]- vout: vout2: aml_vout2_probe OK
[    0.717826@4]- DI: di_module_init ok.
[    0.717899@4]- dim:dim_module_init
[    0.718137@4]- dim:dim_probe:
[    0.718338@4]- dev_vframe_init finish
[    0.718676@4]- dim:match name: dim_g12b:id[17]
[    0.718708@4]- dim:no reserved mem.
[    0.718716@4]- dim:warn:alloc_sct:not support:1->0
[    0.722092@4]- dim:warn:pout:from:3->0
[    0.725819@4]- dim:pre_irq:63
[    0.725824@4]- dim:post_irq:64
[    0.725826@4]- dim:no aisr_irq
[    0.725830@4]- dim:err:dim_get_vpu_clkb: get clk vpu error.
[    0.731356@4]- DI: vpu clkb <334000000, 667000000>
[    0.731376@4]- dim:vpu clkb =666666656.
[    0.731435@4]- dim:afbc_prob:ver[2],_g12a,mode[0]
[    0.731436@4]- dim:init ops:17:(null)
[    0.731444@4]- dim:cvs inp:0x1e~0x1f~0x20.
[    0.731554@4]- .
[    0.731593@4]- .
[    0.731635@4]- dim:dim_probe:ok
[    0.731657@4]- dim:dim_module_init finish
[    0.731659@4]- dil:dil_init.
[    0.731769@4]- dil:dil_init ok.
[    0.731851@4]- Reserved memory: failed to init DMA memory pool at 0x00000000e3c00000, size 0 MiB
[    0.740122@4]- PPMGRDRV: info: ppmgr_dev major:508
[    0.740260@4]- aml_vecm_init:module init
[    0.740360@4]- VECM probe start
[    0.740477@4]- Can't find  tv_mode.
[    0.740479@4]- Can't find  lut3d_en.
[    0.740482@4]- Can't find  blue stretch en.
[    0.740500@4]- vlock clk not cfg
[    0.753665@4]- vlock_status_init vlock_en:1
[    0.753799@4]- request amvecm_vsync2_irq successful
[    0.753841@4]- aml_vecm_probe: ok
[    0.753867@4]- amdolby_vision_init:module init
[    0.753996@4]- 
[    0.753996@4]-  amdolby_vision probe start & ver: 20181220
[    0.753999@4]- 
[    0.753999@4]-  cpu_id=2 tvmode=0
[    0.754071@4]- dolby_vision_init_receiver(dvel)
[    0.754073@4]- dolby_vision_init_receiver: dvel
[    0.754214@4]- amdolby_vision_probe: ok
[    0.754219@4]- g12 dovi disable in uboot
[    0.754528@4]- meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[    0.762547@0]h hdmitx: hdmitx_set_drm_pkt: tf=1, cf=1, colormetry=0
[    0.793682@0]- meson-mmc: meson_mmc_probe() : success!
[    0.798070@4]- meson-mmc: gpio_cd = 1ca
[    0.837670@0]- meson-mmc: meson_mmc_probe() : success!
[    0.839974@0]- input: cec_input as /devices/virtual/input/input0
[    0.840093@0]- cectx ff80023c.aocec: not find 'port_num'
[    0.840137@0]- get A default state
[    0.840152@0]- cectx ff80023c.aocec: no clock regs
[    0.844583@0]- cectx ff80023c.aocec: not find 'arc_port_mask'
[    0.853536@3]- cectx ff80023c.aocec: wakeup_reason:0x0
[    0.855474@0]- cectx ff80023c.aocec: wakeup_data: 0x1 0x0
[    0.861051@0]- meson ts init
[    0.861091@0]- tsensor id: 0
[    0.861178@0]- r1p1_tsensor_read  valid cnt is 0
[    0.861191@0]- tsensor trim info: 0xfa0080c0!
[    0.861193@0]- tsensor hireboot: 0xc0ff2af0
[    0.861247@0]- meson ts init
[    0.861258@0]- tsensor id: 1
[    0.861308@0]- r1p1_tsensor_read  valid cnt is 0
[    0.861314@0]- tsensor trim info: 0xfa008077!
[    0.861315@0]- tsensor hireboot: 0xc0ff2ab0
[    0.861475@0]- audio_dsp: [dsp]register dsp to char divece(257)
[    0.861628@0]- amaudio: amaudio: driver amaudio init!
[    0.862124@0]- amaudio: amaudio_init - amaudio: driver amaudio succuess!
[    0.862875@0]- sysled: module init
[    0.863134@0]- meson_wdt ffd0f0d0.watchdog: start watchdog
[    0.863137@0]- meson_wdt ffd0f0d0.watchdog: create hrtimer for watch dog
[    0.863339@0]- meson_wdt ffd0f0d0.watchdog: AML Watchdog Timer probed done
[    0.864344@0]- meson-saradc ff809000.saradc: set delay per tick to <1ms> by default.
[    0.864349@0]- meson-saradc ff809000.saradc: set ticks per period to <1> by default.
[    0.865245@1]- dmc_monitor_probe
[    0.866092@0]- defendkey ff630218.defendkey: Reserved memory is not enough!
[    0.867686@0]- defendkey: probe of ff630218.defendkey failed with error -22
[    0.868129@0]- bl301_manager: driver init
[    0.868131@0]- bl301_manager: IR remote wake-up code: 0x23dc4db2
[    0.868133@0]- bl301_manager: IR remote wake-up code mask: 0xffffffff
[    0.868135@0]- bl301_manager: IR remote wake-up code protocol: 0x0
[    0.868136@0]- bl301_manager: enable 5V system power on suspend/power off state: 0
[    0.881560@2]- usbcore: registered new interface driver snd-usb-audio
[    0.882105@2]- aml_codec_T9015 ff632000.t9015: aml_T9015_audio_codec_probe
[    0.882115@2]- T9015 acodec used by auge, tdmout:1
[    0.882853@2]- asoc debug: aml_audio_controller_probe-129
[    0.883056@2]- aml_tdm_platform_probe, tdm ID = 1, lane_cnt = 4
[    0.883063@2]- TDM id 1 samesource_sel:3
[    0.883068@2]- snd_tdm ff642000.audiobus:tdmb: lane_mask_out = 1, lane_oe_mask_out = 0
[    0.883222@2]- snd_tdm ff642000.audiobus:tdmb: aml_tdm_get_pins error!
[    0.883224@2]- No channel mask node Channel_Mask
[    0.883253@2]- aml_tdm_platform_probe, tdm ID = 2, lane_cnt = 4
[    0.883260@2]- TDM id 2 i2s2hdmi:1
[    0.883263@2]- snd_tdm ff642000.audiobus:i2s2hdmi: lane_mask_out = f, lane_oe_mask_out = 0
[    0.883291@2]- snd_tdm ff642000.audiobus:i2s2hdmi: neither mclk_pad nor mclk2pad set
[    0.883392@2]- snd_tdm ff642000.audiobus:i2s2hdmi: aml_tdm_get_pins error!
[    0.883394@2]- No channel mask node Channel_Mask
[    0.883646@2]- aml_spdif_platform_probe, spdif ID = 0
[    0.883862@2]- aml_spdif_platform_probe, spdif ID = 1
[    0.883871@2]- snd_spdif ff642000.audiobus:spdif_b: spdif 1 has no pinctrl!
[    0.884161@2]- audio-ddr-manager ff642000.audiobus:ddr_manager: 0, irqs toddr 26, frddr 29
[    0.884169@2]- audio-ddr-manager ff642000.audiobus:ddr_manager: 1, irqs toddr 27, frddr 30
[    0.884177@2]- audio-ddr-manager ff642000.audiobus:ddr_manager: 2, irqs toddr 28, frddr 31
[    0.884332@2]- 	datain_src:4, datain_chnum:4, datain_chumask:f
[    0.884333@2]- 	datalb_src:1, datalb_chnum:2, datalb_chmask:3
[    0.884334@2]- 	datain_lane_mask:0x5, datalb_lane_mask:0x1
[    0.884335@2]- datalb_format: 1, chmask for lanes: 0x3
[    0.884486@2]- loopback_platform_probe, p_loopback->id:0 register soc platform
[    0.884625@2]- audiolocker_platform_probe
[    0.885684@2]- Register vad
[    0.885826@2]- asoc-aml-card auge_sound: 	link 0:
[    0.885908@2]- asoc-aml-card auge_sound: 	name : SPDIF-B-dummy
[    0.885910@2]- asoc-aml-card auge_sound: 	format : 4010
[    0.885912@2]- asoc-aml-card auge_sound: 	cpu : SPDIF-B / 6144000
[    0.885914@2]- asoc-aml-card auge_sound: 	codec : dummy / 0
[    0.885916@2]- asoc-aml-card auge_sound: 	link 1:
[    0.885971@2]- asoc-aml-card auge_sound: 	name : TDM-B-T9015-audio-hifi
[    0.885973@2]- asoc-aml-card auge_sound: 	format : 4011
[    0.885975@2]- asoc-aml-card auge_sound: 	cpu : TDM-B / 12288000
[    0.885976@2]- asoc-aml-card auge_sound: 	codec : T9015-audio-hifi / 0
[    0.885978@2]- asoc-aml-card auge_sound: 	link 2:
[    0.886021@2]- asoc-aml-card auge_sound: 	name : SPDIF-A-dummy
[    0.886022@2]- asoc-aml-card auge_sound: 	format : 4010
[    0.886024@2]- asoc-aml-card auge_sound: 	cpu : SPDIF-A / 6144000
[    0.886025@2]- asoc-aml-card auge_sound: 	codec : dummy / 0
[    0.886027@2]- asoc-aml-card auge_sound: 	link 3:
[    0.886079@2]- asoc-aml-card auge_sound: 	name : TDM-C-dummy
[    0.886081@2]- asoc-aml-card auge_sound: 	format : 4011
[    0.886083@2]- asoc-aml-card auge_sound: 	cpu : TDM-C / 12288000
[    0.886084@2]- asoc-aml-card auge_sound: 	codec : dummy / 0
[    0.913159@0]- meson-mmc: emmc: clk 199999997 tuning start
[    0.916070@0]- meson-mmc: emmc: adj_win: < 0 3 4 >
[    0.916074@0]- meson-mmc: step:4, delay1:0x4104104, delay2:0x4004104
[    0.919666@0]- meson-mmc: emmc: adj_win: < 0 1 3 4 >
[    0.919669@0]- meson-mmc: step:8, delay1:0x8208208, delay2:0x8008208
[    0.923270@0]- meson-mmc: emmc: adj_win: < 0 1 3 4 >
[    0.923273@0]- meson-mmc: step:12, delay1:0xc30c30c, delay2:0xc00c30c
[    0.926887@0]- meson-mmc: emmc: adj_win: < 0 1 3 4 >
[    0.926890@0]- meson-mmc: step:16, delay1:0x10410410, delay2:0x10010410
[    0.930562@0]- meson-mmc: emmc: adj_win: < 0 1 3 4 >
[    0.930564@0]- meson-mmc: step:20, delay1:0x14514514, delay2:0x14014514
[    0.933387@0]- meson-mmc: emmc: adj_win: < 0 1 4 >
[    0.933391@0]- meson-mmc: left:2, right:0, mid:3, size:3
[    0.933393@0]- meson-mmc: step:0, delay1:0x0, delay2:0x0
[    0.933396@0]- meson-mmc: emmc: sd_emmc_regs->gclock=0x10000245,sd_emmc_regs->gadjust=0x42000
[    0.933490@0]- emmc: new HS200 MMC card at address 0001
[    0.933493@0]- emmc: clock 199999997, 8-bit-bus-width
[    0.933493@0]-  
[    0.933936@0]- mmcblk0: emmc:0001 8GTF4R 7.28 GiB 
[    0.934095@0]- mmcblk0boot0: emmc:0001 8GTF4R partition 1 4.00 MiB
[    0.934222@0]- mmcblk0boot1: emmc:0001 8GTF4R partition 2 4.00 MiB
[    0.934341@0]- mmcblk0rpmb: emmc:0001 8GTF4R partition 3 512 KiB
[    0.934987@0]-  mmcblk0: p1 p2
[    1.093817@0]- asoc-aml-card auge_sound: control 2:0:0:I2SIn CLK:0 is already present
[    1.096023@0]- snd_tdm ff642000.audiobus:i2s2hdmi: ASoC: Failed to add I2SIn CLK: -16
[    1.103882@0]- aml_dai_tdm_probe, failed add snd tdm controls
[    1.109549@0]- set normal 512 fs /4 fs
[    1.109576@0]- 	 set spdifout clk:6144000, mpll:24576000
[    1.109578@0]- 	 get spdifout clk:6143997, mpll:24575987
[    1.109664@0]- aml_spdif_new spdif_b, clk continuous:1
[    1.109667@0]- spdifout_play_with_zerodata_free, spdif id:1
[    1.109675@0]- asoc-aml-card auge_sound: dummy <-> SPDIF-B mapping ok
[    1.109689@0]- set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987
[    1.109691@0]- aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
[    1.109693@0]- 	lanes_out_cnt(1), lanes_in_cnt(1)
[    1.109694@0]- 	lanes_lb_cnt(0)
[    1.109696@0]- 	slots(2), slot_width(32)
[    1.109698@0]- 	lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
[    1.109707@0]- asoc aml_dai_set_tdm_fmt, 0x4011, 00000000be5ef0eb, id(1), clksel(1)
[    1.109713@0]- master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
[    1.109788@0]- asoc-aml-card auge_sound: T9015-audio-hifi <-> TDM-B mapping ok
[    1.109790@0]- set normal 512 fs /4 fs
[    1.109802@0]- 	 set spdifout clk:6144000, mpll:24576000
[    1.109804@0]- 	 get spdifout clk:6143997, mpll:24575987
[    1.109871@0]- aml_spdif_new spdif_a, clk continuous:1
[    1.109872@0]- spdifout_play_with_zerodata_free, spdif id:0
[    1.109877@0]- asoc-aml-card auge_sound: dummy <-> SPDIF-A mapping ok
[    1.109889@0]- set mclk:12288000, mpll:24576000, get mclk:12287994, mpll:24575987
[    1.109891@0]- aml_dai_set_tdm_slot(), txmask(0x3), rxmask(0x3)
[    1.109892@0]- 	lanes_out_cnt(4), lanes_in_cnt(0)
[    1.109893@0]- 	lanes_lb_cnt(0)
[    1.109895@0]- 	slots(2), slot_width(32)
[    1.109896@0]- 	lanes_oe_out_cnt(0), lanes_oe_in_cnt(0)
[    1.109900@0]- asoc aml_dai_set_tdm_fmt, 0x4011, 00000000c7e8f102, id(2), clksel(2)
[    1.109903@0]- master_mode(1), binv(1), finv(1) out_skew(2), in_skew(3)
[    1.109973@0]- asoc-aml-card auge_sound: dummy <-> TDM-C mapping ok
[    1.111020@0]- snd_card_add_kcontrols card:000000000e5bbe53
[    1.111036@0]- effect_v2 is not init
[    1.111037@0]- Not init vad
[    1.111038@0]- Failed to add VAD controls
[    1.111050@0]- eq/drc v1 function enable
[    1.138304@0]- NET: Registered protocol family 10
[    1.138980@0]- NET: Registered protocol family 17
[    1.139030@0]- Key type dns_resolver registered
[    1.139288@0]- Registered swp emulation handler
[    1.139298@0]- Registered cp15_barrier emulation handler
[    1.139306@0]- Registered setend emulation handler
[    1.139752@0]- registered taskstats version 1
[    1.144862@0]- dwc3 ff500000.dwc3: Configuration mismatch. dr_mode forced to host
[    1.147592@0]- xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.147607@0]- xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    1.147885@0]- xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x20010010
[    1.147915@0]- xhci-hcd xhci-hcd.0.auto: irq 15, io mem 0xff500000
[    1.148016@0]- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.148020@0]- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.148022@0]- usb usb1: Product: xHCI Host Controller
[    1.148025@0]- usb usb1: Manufacturer: Linux 4.9.269 xhci-hcd
[    1.148027@0]- usb usb1: SerialNumber: xhci-hcd.0.auto
[    1.148427@0]- hub 1-0:1.0: USB hub found
[    1.148450@0]- hub 1-0:1.0: 2 ports detected
[    1.148674@0]- xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.148683@0]- xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    1.148737@0]- usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.148799@0]- usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.148803@0]- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.148805@0]- usb usb2: Product: xHCI Host Controller
[    1.148808@0]- usb usb2: Manufacturer: Linux 4.9.269 xhci-hcd
[    1.148810@0]- usb usb2: SerialNumber: xhci-hcd.0.auto
[    1.149168@0]- hub 2-0:1.0: USB hub found
[    1.149191@0]- hub 2-0:1.0: 1 port detected
[    1.150779@0]- rtc-pcf8563 3-0051: setting system clock to 2022-06-01 12:40:38 UTC (1654087238)
[    1.151001@0]- dwc_otg ff400000.dwc2_a: dwc_otg_driver_probe(0000000069c11783)
[    1.151022@0]- dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: ffe09000, ctrl: 0
[    1.151034@0]- dwc_otg ff400000.dwc2_a: base=0xffffff8008b40000
[    1.151037@0]- dwc_otg ff400000.dwc2_a: dwc_otg_device=0x00000000d2de692d
[    1.251164@2]- dwc_otg: Core Release: 3.30a
[    1.251168@2]- dwc_otg: Setting default values for core params
[    1.251174@2]- dwc_otg: curmode: 0, host_only: 0
[    1.251186@2]- dwc_otg ff400000.dwc2_a: DMA config: BURST_DEFAULT
[    1.263318@2]- dwc_otg: Using Buffer DMA mode
[    1.263320@2]- dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
[    1.263322@2]- dwc_otg: Working on port type = SLAVE
[    1.263324@2]- dwc_otg: Dedicated Tx FIFOs mode
[    1.264642@2]- meson_cdev probe
[    1.264648@2]- thermal: read gpupp failed
[    1.264716@2]- meson_cdev index: 0
[    1.264777@2]- thermal: read gpupp failed
[    1.267034@2]- meson_cdev index: 1
[    1.267077@2]- thermal: read dyn_coeff failed
[    1.271352@2]- thermal: read gpupp failed
[    1.275336@2]- thermal: no cluster id, cpucore as one cooldev
[    1.275348@2]- meson_cdev index: 2
[    1.275351@2]- cpucore_cooling_register, max_cpu_core_num:6
[    1.275353@2]- cpucore_cooling_register, clutser[1] core num:4
[    1.275354@2]- cpucore_cooling_register, clutser[0] core num:2
[    1.275391@2]- thermal: no cluster id, cpucore as one cooldev
[    1.275402@2]- meson_cdev index: 3
[    1.275404@2]- thermal: read dyn_coeff failed
[    1.279670@2]- thermal: read gpupp failed
[    1.283655@2]- thermal: no cluster id, cpucore as one cooldev
[    1.283665@2]- meson_cdev index: 4
[    1.283688@2]- find tzd id: 0
[    1.283756@2]- find tzd id: 0
[    1.283809@2]- find tzd id: 0
[    1.283828@2]- meson_cdev probe done
[    1.283891@2]- gxbb_pm: enter meson_pm_probe!
[    1.283894@2]- no vddio3v3_en pin
[    1.283899@2]- pm-meson pm: Can't get switch_clk81
[    1.288439@2]- gxbb_pm: meson_pm_probe done
[    1.289052@2]- ALSA device list:
[    1.289054@2]-   #0: AML-AUGESOUND
[    1.290385@2]- Freeing unused kernel memory: 5056K
[    1.315569@4]- fb: malloc_osd_memory, cma:ffffff800aec1698
[    1.315573@4]- fb: malloc_osd_memory, 1224, base:0x0000000077800000, size:8388608
[    1.315585@4]- fb: use ion buffer for fb memory, fb_index=0
[    1.315587@4]- fb: OSD0 as afbcd mode,afbc_type=2
[    1.342691@1]- meson-fb meson-fb: create ion_client ffffffc0dc7eb9c0, handle=0000000006e9efd2
[    1.345588@1]- meson-fb meson-fb: ion memory(0): created fb at 0x00000000e5800000, size 75 MiB
[    1.354233@2]- fb:  0, phy: 0x00000000e5800000, vir:0xffffff800af71000, size=77312K
[    1.354233@2]- 
[    1.354235@2]- fb: Frame buffer memory assigned at
[    1.354237@2]- fb:  0, phy: 0x00000000e5800000, vir:0xffffff800af71000, size=77312K
[    1.354237@2]- 
[    1.354239@2]- fb:  0, phy: 0x00000000e5800000, vir:0xffffff800af71000, size=77312K
[    1.354239@2]- 
[    1.354241@2]- fb: logo_index=0,fb_index=0
[    1.354243@2]- fb: ---------------clear fb0 memory 00000000ae5cf8aa
[    1.367601@2]- fb: osd[0] canvas.idx =0x40
[    1.367602@2]- fb: osd[0] canvas.addr=0xe5800000
[    1.367603@2]- fb: osd[0] canvas.width=7680
[    1.367604@2]- fb: osd[0] canvas.height=2160
[    1.367605@2]- fb: osd[0] frame.width=1920
[    1.367606@2]- fb: osd[0] frame.height=1080
[    1.367607@2]- fb: osd[0] out_addr_id =0x1
[    1.379947@2]- fb: osd_release now.index=0,open_count=1
[    1.380840@3]- fb: malloc_osd_memory, cma:ffffff800aec1698
[    1.380844@3]- fb: malloc_osd_memory, 1224, base:0x0000000077800000, size:8388608
[    1.380845@3]- fb: use ion buffer for fb memory, fb_index=1
[    1.380846@3]- fb: OSD1 as afbcd mode,afbc_type=2
[    1.381253@3]- meson-fb meson-fb: create ion_client ffffffc0dc7eb9c0, handle=00000000e501b3f2
[    1.384168@3]- meson-fb meson-fb: ion memory(1): created fb at 0x00000000ea400000, size 1 MiB
[    1.392668@3]- fb:  1, phy: 0x00000000ea400000, vir:0xffffff8008cf5000, size=1024K
[    1.392668@3]- 
[    1.392670@3]- fb: Frame buffer memory assigned at
[    1.392672@3]- fb:  1, phy: 0x00000000ea400000, vir:0xffffff8008cf5000, size=1024K
[    1.392672@3]- 
[    1.392673@3]- fb:  1, phy: 0x00000000ea400000, vir:0xffffff8008cf5000, size=1024K
[    1.392673@3]- 
[    1.392675@3]- fb: logo_index=0,fb_index=1
[    1.392677@3]- fb: ---------------clear fb1 memory 0000000060690421
[    1.392856@3]- fb: osd[1] canvas.idx =0x43
[    1.392857@3]- fb: osd[1] canvas.addr=0xea400000
[    1.392859@3]- fb: osd[1] canvas.width=128
[    1.392859@3]- fb: osd[1] canvas.height=32
[    1.392860@3]- fb: osd[1] frame.width=32
[    1.392861@3]- fb: osd[1] frame.height=32
[    1.392862@3]- fb: osd[1] out_addr_id =0x2
[    1.396758@1]- fb: osd_release now.index=1,open_count=1
[    1.413421@0]- VID: VD1 off
[    1.413531@0]- fb: osd[0] enable: 1 (sh)
[    1.413737@0]d amlogic-new-usb2-v2 ffe09000.usb2phy: ---Set port(0) tuning for host cf(xhci_hub_control)--
[    1.430069@0]- fb: osd[1] enable: 0 (sh)
[    1.455311@1]- init: ### Loading kernel modules
[    1.456972@2]- init: ### Loading kernel module font
[    1.457529@2]- init: ### Loading kernel module softcursor
[    1.458010@2]- init: ### Loading kernel module bitblit
[    1.458462@2]- init: ### Loading kernel module fbcon
[    1.463344@0]- Console: switching to colour frame buffer device 240x67
[    1.473690@0]- usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    1.478801@1]- init: ### Set console font
[    1.481903@2]- init: ### Checking disk(s):  UUID=2911-4504 UUID=d64f1eca-7a63-4904-9030-3446e096b23b
[    1.567381@1]- init: ### Cannot initialize conversion from codepage 850 to ANSI_X3.4-1968: Invalid argument
[    1.567566@1]- init: ### Cannot initialize conversion from ANSI_X3.4-1968 to codepage 850: Invalid argument
[    1.567663@1]- init: ### Using internal CP850 conversion table
[    1.567737@1]- init: ### fsck.fat 4.2 (2021-01-31)
[    1.567861@1]- init: ### /dev/mmcblk0p1: 73 files, 28668/65501 clusters
[    1.568000@1]- init: ### STORAGE: clean, 26450/1777664 files, 1917079/7106560 blocks
[    1.569111@1]- init: ### No filesystem errors found, continuing...
[    1.569219@1]- init: ### Mounting flash
[    1.569285@1]- init: ### mount filesystem UUID=2911-4504 ...
[    1.592901@1]- init: ### Cleaning up flash (if required)
[    1.593279@1]- init: ### mount filesystem /flash/SYSTEM ...
[    1.620081@0]- usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[    1.620087@0]- usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.620090@0]- usb 1-1: Product: USB2.1 Hub
[    1.620092@0]- usb 1-1: Manufacturer: GenesysLogic
[    1.629053@0]- hub 1-1:1.0: USB hub found
[    1.629299@0]- hub 1-1:1.0: 4 ports detected
[    1.630343@1]- init: ### Mounting storage
[    1.630501@1]- init: ### mount filesystem UUID=d64f1eca-7a63-4904-9030-3446e096b23b ...
[    1.645696@0]- av out status: high av_mute_sleep_time:500
[    1.649040@1]- EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    1.649266@1]- EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    1.662233@1]- EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.673551@1]- init: ### Loading bootsplash
[    1.679618@1]- init: ### Checking for updates
[    1.706207@4]- init: ### Preparing system
[    1.728991@1]- init: ### Checking Amlogic DTB
[    1.741816@0]- usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[    1.764379@0]- usb 2-1: New USB device found, idVendor=05e3, idProduct=0620
[    1.764385@0]- usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.764388@0]- usb 2-1: Product: USB3.1 Hub
[    1.764391@0]- usb 2-1: Manufacturer: GenesysLogic
[    1.773043@0]- hub 2-1:1.0: USB hub found
[    1.773360@0]- hub 2-1:1.0: 4 ports detected
[    1.956328@5]- kernel-overlays-setup: setup base modules
[    1.973692@0]- usb 1-1.4: new full-speed USB device number 3 using xhci-hcd
[    1.993175@2]- kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.9.269
[    2.036557@2]- kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[    2.036835@2]- kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
[    2.037700@1]- kernel-overlays-setup: done
[    2.099351@0]- usb 1-1.4: New USB device found, idVendor=20a0, idProduct=0006
[    2.099357@0]- usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.099360@0]- usb 1-1.4: Product: flirc
[    2.099362@0]- usb 1-1.4: Manufacturer: flirc.tv
[    2.114799@0]- hid-generic 0003:20A0:0006.0001: hiddev0,hidraw0: USB HID v1.11 Device [flirc.tv flirc] on usb-xhci-hcd.0.auto-1.4/input0
[    2.119260@0]- input: flirc.tv flirc as /devices/platform/ff500000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.4/1-1.4:1.1/0003:20A0:0006.0002/input/input1
[    2.131396@2]- cgroup: cgroup2: unknown option "nsdelegate"
[    2.134437@2]- systemd[1]: systemd 247.9 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[    2.134773@2]- systemd[1]: Detected architecture arm64.
[    2.137080@2]- systemd[1]: Set hostname to <CoreELEC>.
[    2.178092@0]- hid-generic 0003:20A0:0006.0002: input,hidraw1: USB HID v1.01 Keyboard [flirc.tv flirc] on usb-xhci-hcd.0.auto-1.4/input1
[    2.179888@0]- hid-generic 0003:20A0:0006.0003: hiddev0,hidraw2: USB HID v1.11 Device [flirc.tv flirc] on usb-xhci-hcd.0.auto-1.4/input2
[    2.276599@2]- systemd[1]: /usr/lib/systemd/system/amlogic-dvb.service:8: Ignoring unknown escape sequences: "[ ! -f '/proc/device-tree/dvb/status' -a $(tr -d '\0' < /proc/device-tree/dvb/compatible) = amlogic,dvb ] && /sbin/modprobe aml_fe"
[    2.276633@2]- systemd[1]: /usr/lib/systemd/system/amlogic-dvb.service:9: Ignoring unknown escape sequences: "[ -f '/proc/device-tree/dvb/status' -a $(tr -d '\0' < /proc/device-tree/dvb/status) = okay ] && /sbin/modprobe aml_fe"
[    2.293786@2]- systemd[1]: Queued start job for default target Kodi Mediacenter Interface.
[    2.316000@2]- systemd[1]: Created slice Slice /system/modprobe.
[    2.316521@2]- systemd[1]: Created slice User and Session Slice.
[    2.316636@2]- systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.316725@2]- systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.316856@2]- systemd[1]: Reached target Host and Network Name Lookups.
[    2.316890@2]- systemd[1]: Reached target Paths.
[    2.316959@2]- systemd[1]: Reached target Slices.
[    2.325443@1]- systemd[1]: Listening on RPCbind Server Activation Socket.
[    2.325549@1]- systemd[1]: Reached target RPC Port Mapper.
[    2.325829@2]- systemd[1]: Listening on initctl Compatibility Named Pipe.
[    2.326219@2]- systemd[1]: Listening on Journal Audit Socket.
[    2.326427@2]- systemd[1]: Listening on Journal Socket (/dev/log).
[    2.326641@2]- systemd[1]: Listening on Journal Socket.
[    2.327059@2]- systemd[1]: Listening on udev Control Socket.
[    2.327211@2]- systemd[1]: Listening on udev Kernel Socket.
[    2.327453@2]- systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[    2.328802@2]- systemd[1]: Mounting POSIX Message Queue File System...
[    2.330278@2]- systemd[1]: Mounting Kernel Debug File System...
[    2.331810@2]- systemd[1]: Mounting Kernel Trace File System...
[    2.333319@2]- systemd[1]: Mounting Variable Directory...
[    2.335255@2]- systemd[1]: Started Early root shell on /dev/ttyS0 FOR DEBUGGING ONLY.
[    2.335352@4]- meson_uart ff803000.serial: ttyS0 use xtal(24M) 24000000 change 115200 to 115200
[    2.337211@2]- systemd[1]: Starting Create list of static device nodes for the current kernel...
[    2.339336@2]- systemd[1]: Starting Load Kernel Module configfs...
[    2.341123@2]- systemd[1]: Starting Load Kernel Module drm...
[    2.343054@2]- systemd[1]: Starting Load Kernel Module fuse...
[    2.345136@2]- systemd[1]: Starting Create Persistent Log Directory on /storage and rotate large logs...
[    2.347051@2]- systemd[1]: Starting Mounting swapfile...
[    2.350484@2]- systemd[1]: Starting Rebuild Hardware Database...
[    2.353483@2]- systemd[1]: Starting Load Kernel Modules...
[    2.357719@2]- systemd[1]: Starting Setup NTP servers for timesyncd...
[    2.360093@2]- systemd[1]: Starting Coldplug All udev Devices...
[    2.365113@3]- systemd[1]: Starting Wait for Kernel Time Synchronisation...
[    2.369068@3]- systemd[1]: Mounted POSIX Message Queue File System.
[    2.369488@3]- systemd[1]: Mounted Kernel Debug File System.
[    2.369939@3]- systemd[1]: Mounted Kernel Trace File System.
[    2.370281@3]- systemd[1]: Mounted Variable Directory.
[    2.371721@3]- systemd[1]: Finished Create list of static device nodes for the current kernel.
[    2.375509@5]- systemd[1]: modprobe@configfs.service: Succeeded.
[    2.376568@5]- systemd[1]: Finished Load Kernel Module configfs.
[    2.377432@5]- systemd[1]: modprobe@drm.service: Succeeded.
[    2.378316@5]- systemd[1]: Finished Load Kernel Module drm.
[    2.379620@5]- systemd[1]: Finished Setup NTP servers for timesyncd.
[    2.382181@5]- systemd[1]: Mounting Kernel Configuration File System...
[    2.383823@5]- systemd[1]: Finished Create Persistent Log Directory on /storage and rotate large logs.
[    2.385115@5]- systemd[1]: Condition check resulted in Persistent Log Storage being skipped.
[    2.387120@2]- fuse init (API version 7.26)
[    2.390417@5]- media: Linux media interface: v0.10
[    2.401105@2]- Linux video capture interface: v2.00
[    2.408478@0]- systemd[1]: modprobe@fuse.service: Succeeded.
[    2.415773@5]- amlvideo-000: V4L2 device registered as video10
[    2.415778@5]- amlvid:info: v4l2_dev.name=:amlvideo-001
[    2.415842@2]- amlvideo-001: V4L2 device registered as video23
[    2.421005@2]- video_framerate_adapter: loading out-of-tree module taints kernel.
[    2.421510@0]- Registered frame rate driver success.
[    2.422995@5]- No find node.
[    2.423043@5]- register clk_set_setting cpu[41]
[    2.427808@3]- Registered firmware driver success.
[    2.428315@3]- Try to load video/h264_enc.bin  ...
[    2.428356@3]- load firmware size : 76288, Name : video/h264_enc.bin.
[    2.428900@3]- Try to load video/video_ucode.bin  ...
[    2.429535@3]- load firmware size : 1871104, Name : video/video_ucode.bin.
[    2.429539@3]- The fw driver version (v0.2) is lower than the pkg version (v0.3).
[    2.429540@3]- The driver version is too low that may affect the work please update asap.
[    2.444916@2]- Amlogic A/V streaming port init
[    2.446224@5]- get gate demux control ok 00000000ebf92678
[    2.446235@5]- get gate parser_top control ok 00000000d618a0a8
[    2.446253@5]- get gate vdec control ok 000000001c56b4d2
[    2.446257@5]- get gate clk_81 control failed           (null)
[    2.446277@5]- get gate clk_vdec_mux control ok 00000000a154fd53
[    2.446301@5]- get gate clk_hcodec_mux control ok 000000004ce9fbff
[    2.446328@5]- get gate clk_hevc_mux control ok 00000000710712c5
[    2.446358@5]- get gate clk_hevcb_mux control ok 00000000b7155a6d
[    2.446371@5]- get gate ahbarb0 control ok 000000007f82cbc2
[    2.446374@5]- get gate asyncfifo control failed           (null)
[    2.446376@5]- get gate clk_hevcf_mux control failed           (null)
[    2.446377@5]- get mux clk err.
[    2.446378@5]- get mux clk err.
[    2.446379@5]- get mux clk err.
[    2.454021@2]- amvdec_avs module init
[    2.461270@3]- amvdec_h264 module init
[    2.466492@3]- amvdec_h265 module init
[    2.472258@3]- ammvdec_h264 module init
[    2.475845@3]- ammvdec_mpeg12 module init
[    2.477185@3]- ammvdec_mpeg4_driver_init_module 
[    2.491513@3]- amvdec_vc1 module init
[    2.495349@2]- amvdec_vp9 module init
[    2.499768@2]- Triggered SDIO WiFi power on and bus rescan.
[    2.499775@2]- (NULL device *): [extern_wifi_set_enable] WIFI  Disable! 0
[    2.511546@3]- systemd[1]: Finished Load Kernel Module fuse.
[    2.514277@3]- systemd[1]: Mounted Kernel Configuration File System.
[    2.516195@3]- systemd[1]: Mounting FUSE Control File System...
[    2.520581@5]- systemd[1]: Mounted FUSE Control File System.
[    2.531965@5]- systemd[1]: Finished Mounting swapfile.
[    2.532212@5]- systemd[1]: Reached target Swap.
[    2.533560@5]- systemd[1]: Mounting Temporary Directory (/tmp)...
[    2.538171@5]- systemd[1]: Mounted Temporary Directory (/tmp).
[    2.538411@5]- systemd[1]: Reached target Local File Systems.
[    2.539870@5]- systemd[1]: Starting Setup machine-id...
[    2.562683@5]- systemd[1]: Finished Setup machine-id.
[    2.565142@5]- systemd[1]: Starting Journal Service...
[    2.566752@5]- systemd[1]: Starting Create Static Device Nodes in /dev...
[    2.642502@4]- systemd[1]: Finished Coldplug All udev Devices.
[    2.652444@4]- systemd[1]: Finished Create Static Device Nodes in /dev.
[    2.701975@5]- systemd[1]: Started Journal Service.
[    2.716097@3]- systemd-journald[2714]: Received client request to flush runtime journal.
[    2.829995@2]- (NULL device *): [extern_wifi_set_enable] WIFI  Enable! 0
[    3.149668@2]- meson-mmc: Error: sdio_host is NULL
[    3.149673@2]- meson-mmc: [sdio_reinit] finish
[    3.162173@4]- wireguard: WireGuard 1.0.20210219 loaded. See www.wireguard.com for information.
[    3.162182@4]- wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    3.418435@2]- Console: switching to colour dummy device 80x25
[    3.446288@0]- Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.450830@2]- proc: unrecognized mount option "hidepid=invisible" or missing value
[    3.526060@3]- mali ffe40000.bifrost: Continuing without Mali regulator control
[    3.526145@3]- mali ffe40000.bifrost: max pp is 2
[    3.526148@3]- mali ffe40000.bifrost: set min pp to default 1
[    3.526150@3]- mali ffe40000.bifrost: min pp is 1
[    3.526152@3]- mali ffe40000.bifrost: set min clk default to 0
[    3.526154@3]- mali ffe40000.bifrost: min clk  is 0
[    3.526165@3]- mali ffe40000.bifrost: hiu io source  0x00000000020cd655
[    3.526169@3]- mali ffe40000.bifrost: hiu io source  0x0000000027749895
[    3.526171@3]- mali ffe40000.bifrost: num of pp used most of time 1
[    3.526173@3]- mali ffe40000.bifrost: clock dvfs cfg table size is 6
[    3.526188@3]- mali ffe40000.bifrost: max clk set 4
[    3.526190@3]- mali ffe40000.bifrost: max clk  is 4
[    3.526192@3]- mali ffe40000.bifrost: turbo clk set to 5
[    3.526194@3]- mali ffe40000.bifrost: turbo clk  is 5
[    3.526196@3]- mali ffe40000.bifrost: default clk set to 4
[    3.526197@3]- mali ffe40000.bifrost: default clk  is 4
[    3.526202@3]- mali ffe40000.bifrost: ====================0====================
[    3.526202@3]- clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<0 76>, clk_sample=285
[    3.526205@3]- mali ffe40000.bifrost: ====================1====================
[    3.526205@3]- clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=5, threshod=<152 207>, clk_sample=400
[    3.526208@3]- mali ffe40000.bifrost: ====================2====================
[    3.526208@3]- clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<38 194>, clk_sample=500
[    3.526211@3]- mali ffe40000.bifrost: ====================3====================
[    3.526211@3]- clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=5, threshod=<150 203>, clk_sample=666
[    3.526213@3]- mali ffe40000.bifrost: ====================4====================
[    3.526213@3]- clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
[    3.526216@3]- mali ffe40000.bifrost: ====================5====================
[    3.526216@3]- clk_freq= 800000000, clk_parent=fclk_div2p5, voltage=1150, keep_count=5, threshod=<230 255>, clk_sample=800
[    3.526217@3]- mali ffe40000.bifrost: clock dvfs table size is 6
[    3.526313@3]- mali_plat=000000008a266310
[    3.526519@3]- find tzd id: 0
[    3.526556@3]- gpu cooling register okay with err=0
[    3.526659@3]- find tzd id: 0
[    3.526673@3]- gpu core cooling register okay with err=0
[    3.526699@3]- shader_present=3, tiler_present=1, l2_present=1
[    3.526783@3]- Mali_pwr_on:gpu_irq : 200
[    3.526960@3]- mali ffe40000.bifrost: GPU identified as 0x2 arch 7.2.1 r0p0 status 0
[    3.527104@3]- mali ffe40000.bifrost: Using coherency mode 0 set from dtb
[    3.539204@5]- mali ffe40000.bifrost: Probed as mali0
[    3.582251@4]- lcd vlock_en=1, vlock_mode=0x4
[    4.112958@0]- meson6-dwmac ff3f0000.ethernet eth0: fail to init PTP.
[    4.113753@0]- IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.247281@1]- proc: unrecognized mount option "hidepid=invisible" or missing value
[    8.206007@0]d meson6-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[    8.206034@0]- IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    8.217197@0]- 8021q: 802.1Q VLAN Support v1.8
[   13.571868@1]- Registered IR keymap rc-empty
[   13.572173@1]- input: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0/input2
[   13.572340@3]- rc rc0: meson-ir as /devices/platform/ff808040.meson-ir/rc/rc0
[   13.574787@4]- meson-ir ff808040.meson-ir: AO_RTI_PIN_MUX : 0x100011
[   13.574797@4]- meson-ir ff808040.meson-ir: receiver initialized
[   13.576046@3]- lirc_dev: IR Remote Control driver registered, major 499
[   13.577970@3]- rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
[   13.577974@3]- IR LIRC bridge handler initialized
[   13.660148@2]- IR NEC protocol handler initialized
[   13.688859@1]- IR RC6 protocol handler initialized
[   62.477662@3]- fb: mem_free_work, free memory: addr:800000

Command 'ssh root@media-odroid lscpu'

Architecture:        aarch64
Byte Order:          Little Endian
CPU(s):              6
On-line CPU(s) list: 0-5
Vendor ID:           ARM
Model name:          Cortex-A53
Model:               4
Thread(s) per core:  1
Core(s) per socket:  2
Socket(s):           1
Stepping:            r0p4
CPU max MHz:         1896.0000
CPU min MHz:         500.0000
BogoMIPS:            48.00
Flags:               fp asimd evtstrm aes pmull sha1 sha2 crc32
Model name:          Cortex-A73
Model:               2
Thread(s) per core:  1
Core(s) per socket:  4
Socket(s):           1
Stepping:            r0p2
CPU max MHz:         1800.0000
CPU min MHz:         500.0000
BogoMIPS:            48.00
Flags:               fp asimd evtstrm aes pmull sha1 sha2 crc32

Command 'ssh root@media-odroid free -m'

               total        used        free      shared  buff/cache   available
Mem:            3677         178        3298          17         201        3424
Swap:              0           0           0

Command 'ssh root@media-odroid df -h'

Filesystem                Size      Used Available Use% Mounted on
devtmpfs                  1.8G      4.0K      1.8G   0% /dev
tmpfs                   735.6M     13.1M    722.5M   2% /run
/dev/mmcblk0p1          511.7M    224.0M    287.8M  44% /flash
/dev/loop0              200.5M    200.5M         0 100% /
/dev/mmcblk0p2            6.6G      1.6G      4.9G  25% /storage
tmpfs                     1.8G         0      1.8G   0% /dev/shm
tmpfs                     4.0M         0      4.0M   0% /sys/fs/cgroup
tmpfs                     1.8G      2.3M      1.8G   0% /var
tmpfs                     1.8G         0      1.8G   0% /tmp

Command 'ssh root@media-odroid mount'

devtmpfs on /dev type devtmpfs (rw,relatime,size=1876980k,nr_inodes=469245,mode=755)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /run type tmpfs (rw,nosuid,nodev,size=753240k,nr_inodes=819200,mode=755)
/dev/mmcblk0p1 on /flash type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro)
/dev/loop0 on / type squashfs (ro,relatime)
/dev/mmcblk0p2 on /storage type ext4 (rw,noatime,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,size=4096k,nr_inodes=1024,mode=755)
cgroup2 on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
bpf on /sys/fs/bpf type bpf (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/debug type cgroup (rw,nosuid,nodev,noexec,relatime,debug)
mqueue on /dev/mqueue type mqueue (rw,nosuid,nodev,noexec,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,nosuid,nodev,noexec,relatime)
tracefs on /sys/kernel/tracing type tracefs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /var type tmpfs (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,nosuid,nodev,noexec,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,nosuid,nodev,noexec,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,nr_inodes=409600)
sunrpc on /run/nfs/rpc_pipefs type rpc_pipefs (rw,relatime)
nfsd on /proc/fs/nfsd type nfsd (rw,relatime)

Command 'ssh root@media-odroid aplay -L'

null
    Discard all samples (playback) or generate zero samples (capture)
default:CARD=AMLAUGESOUND
    AML-AUGESOUND, 
    Default Audio Device
sysdefault:CARD=AMLAUGESOUND
    AML-AUGESOUND, 
    Default Audio Device
surround71:CARD=AMLAUGESOUND,DEV=0
    AML-AUGESOUND, 
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=AMLAUGESOUND,DEV=0
    AML-AUGESOUND, 
    IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=AMLAUGESOUND,DEV=0
    AML-AUGESOUND, 
    HDMI Audio Output

Command 'ssh root@media-odroid lsmod'

Module                  Size  Used by
ir_rc6_decoder         16384  0
ir_nec_decoder         16384  0
ir_lirc_codec          16384  0
lirc_dev               24576  1 ir_lirc_codec
meson_ir               16384  0
rc_core                40960  6 ir_rc6_decoder,ir_nec_decoder,ir_lirc_codec,meson_ir,lirc_dev
8021q                  36864  0
joydev                 24576  0
mali_kbase            507904  0
nfsd                  364544  3
exportfs               16384  1 nfsd
nfs_acl                16384  1 nfsd
wireguard             135168  0
ip6_udp_tunnel         16384  1 wireguard
udp_tunnel             16384  1 wireguard
wifi_dummy             16384  0
amvdec_vp9            147456  0
amvdec_vc1             77824  0
amvdec_real            49152  0
amvdec_ports          176128  0
v4l2_common            16384  1 amvdec_ports
videobuf2_dma_contig    20480  1 amvdec_ports
videobuf2_memops       16384  1 videobuf2_dma_contig
v4l2_mem2mem           28672  1 amvdec_ports
videobuf2_v4l2         24576  2 amvdec_ports,v4l2_mem2mem
videobuf2_core         49152  3 amvdec_ports,v4l2_mem2mem,videobuf2_v4l2
amvdec_mpeg4           73728  0
amvdec_mpeg12         131072  0
amvdec_mmpeg4          49152  0
amvdec_mmpeg12         57344  0
amvdec_mmjpeg          36864  0
amvdec_mjpeg           45056  0
amvdec_mh264          192512  0
amvdec_h265           184320  0
amvdec_h264mvc         65536  0
amvdec_h264           167936  0
amvdec_mavs            65536  0
amvdec_avs             81920  0
amvdec_avs2           241664  0
stream_input          221184  12 amvdec_h265,amvdec_mavs,amvdec_mh264,amvdec_h264mvc,amvdec_ports,amvdec_real,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_mmpeg12
decoder_common        253952  18 amvdec_h265,amvdec_mavs,amvdec_mjpeg,amvdec_mh264,amvdec_mmpeg4,amvdec_h264mvc,amvdec_mmjpeg,amvdec_ports,amvdec_real,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_vc1,amvdec_mmpeg12,amvdec_mpeg4
firmware               28672  18 amvdec_h265,amvdec_mavs,amvdec_mjpeg,amvdec_mh264,amvdec_mmpeg4,amvdec_h264mvc,amvdec_mmjpeg,decoder_common,amvdec_real,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_vc1,amvdec_mmpeg12,amvdec_mpeg4
media_clock            45056  16 amvdec_h265,amvdec_mavs,amvdec_mh264,amvdec_mmpeg4,amvdec_mmjpeg,decoder_common,amvdec_ports,firmware,stream_input,amvdec_vp9,amvdec_h264,amvdec_avs2,amvdec_mpeg12,amvdec_avs,amvdec_vc1,amvdec_mpeg4
video_framerate_adapter    16384  1 decoder_common
amlvideodri            24576  0
videobuf_res           16384  1 amlvideodri
videobuf_core          32768  2 amlvideodri,videobuf_res
videodev              290816  6 amlvideodri,v4l2_common,amvdec_ports,videobuf2_core,v4l2_mem2mem,videobuf2_v4l2
media                  40960  1 videodev
fuse                  131072  1
fbcon                  61440  0
bitblit                16384  1 fbcon
softcursor             16384  1 bitblit
font                   20480  1 fbcon