Description: vps System Information
Authored: 2026-07-09;
Permalink: https://adamflott.com/systems/vps/
categories :
systems;
generated 2026-07-09 20:42
System:
Kernel: 6.18.36 arch: x86_64 bits: 64 compiler: gcc v: 15.2.0 clocksource: kvm-clock
avail: tsc,acpi_pm
parameters: BOOT_IMAGE=(hd0,msdos1)/nix/store/n3y6zqiphvrsg3fxh1z2ymjhjl2qvqk2-linux-6.18.36/bzImage
init=/nix/store/934fhs874mj5gqrk6bhkn2si74ld57dk-nixos-system-nixos-vps-b4c4-us-dal1-1-26.05.3123.667d5cf1c595/init
root=fstab loglevel=4 lsm=landlock,yama,bpf
Console: tty 1 Distro: NixOS 26.05 (Yarara)
Machine:
Type: Kvm System: QEMU product: Standard PC (i440FX + PIIX, 1996) v: pc-i440fx-jammy
serial: <superuser required> Chassis: type: 1 v: pc-i440fx-jammy serial: <superuser required>
Mobo: N/A model: N/A serial: N/A uuid: <superuser required> Firmware: BIOS vendor: SeaBIOS
v: 1.15.0-1 date: 04/01/2014
Battery:
Message: No system battery data found. Is one present?
Memory:
System RAM: total: 4 GiB available: 3.83 GiB used: 612.6 MiB (15.6%)
Message: For most reliable report, use superuser + dmidecode.
Array-1: capacity: 4 GiB slots: 1 modules: 1 EC: Multi-bit ECC max-module-size: 4 GiB
note: est.
Device-1: DIMM 0 type: RAM detail: N/A size: 4 GiB speed: N/A volts: N/A width: N/A
manufacturer: Qemu part-no: N/A serial: N/A
PCI Slots:
Permissions: Unable to run dmidecode. Root privileges required.
CPU:
Info: model: Intel Xeon E312xx (Sandy Bridge IBRS update) bits: 64 type: SMP arch: Sandy Bridge
level: v2 built: 2010-12 process: Intel 32nm family: 6 model-id: 0x2A (42) stepping: 1
microcode: 0x1
Topology: cpus: 4x dies: 1 clusters: 1 cores: 1 smt: <unsupported> cache:
L1: 4x 64 KiB (256 KiB) desc: d-1x32 KiB; i-1x32 KiB L2: 4x 4 MiB (16 MiB) desc: 1x4 MiB
L3: 4x 16 MiB (64 MiB) desc: 1x16 MiB
Speed (MHz): avg: 2100 min/max: N/A cores: 1: 2100 2: 2100 3: 2100 4: 2100 bogomips: 16799
Flags: aes apic arat avx clflush cmov constant_tsc cpuid cpuid_fault cx16 cx8 de fpu fxsr
hypervisor ibpb ibrs lahf_lm lm mca mce mmx msr mtrr nopl nx pae pat pclmulqdq pge pni popcnt
pse pse36 pti rdtscp rep_good sep sse sse2 sse4_1 sse4_2 ssse3 syscall tsc tsc_deadline_timer
tsc_known_freq vme x2apic xsave xsaveopt xtopology
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: ghostwrite status: Not affected
Type: indirect_target_selection mitigation: Aligned branch/return thunks
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT Host state unknown
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Not affected
Type: old_microcode status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW; STIBP: disabled; RSB
filling; PBRSB-eIBRS: Not affected; BHI: Retpoline
Type: srbds status: Not affected
Type: tsa status: Not affected
Type: tsx_async_abort status: Not affected
Type: vmscape status: Not affected
Graphics:
Device-1: Red Hat QXL paravirtual graphic card driver: qxl v: kernel ports: active: Virtual-1
empty: Virtual-2,Virtual-3,Virtual-4 bus-ID: 00:02.0 chip-ID: 1b36:0100 class-ID: 0300
Display: server: No display server data found. Headless machine? tty: 80x40
Monitor-1: Virtual-1 size-res: N/A in console modes: 1024x768, 800x600, 848x480, 720x480,
640x480
API: N/A Message: No API data available in console. Headless machine?
Info: Tools: No graphics tools found.
Audio:
Message: No device data found.
Network:
Device-1: Intel 82371AB/EB/MB PIIX4 ACPI vendor: Red Hat Qemu virtual machine
type: network bridge driver: piix4_smbus v: N/A modules: i2c_piix4 port: N/A bus-ID: 00:01.3
chip-ID: 8086:7113 class-ID: 0680
Device-2: Intel 82540EM Gigabit Ethernet vendor: Red Hat QEMU Virtual Machine driver: e1000
v: kernel port: c000 bus-ID: 00:03.0 chip-ID: 8086:100e class-ID: 0200
IF: ens3 state: up speed: 1000 Mbps duplex: full mac: <filter>
IP v4: <filter> type: dynamic noprefixroute scope: global broadcast: <filter>
IP v6: <filter> type: dynamic mngtmpaddr noprefixroute scope: global
IP v6: <filter> scope: link
Info: services: nginx,sshd,systemd-timesyncd
WAN IP: <filter>
Bluetooth:
Message: No bluetooth data found.
Logical:
Message: No logical block device data found.
RAID:
Message: No RAID data found.
Drives:
Local Storage: total: 100 GiB used: 8.17 GiB (8.2%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: QEMU model: HARDDISK size: 100 GiB block-size:
physical: 512 B logical: 512 B tech: N/A serial: <filter> fw-rev: 2.5+ scheme: MBR
Optical-1: /dev/sr0 vendor: QEMU model: QEMU DVD-ROM rev: 2.5+ dev-links: cdrom
Features: speed: 4 multisession: yes audio: yes dvd: yes rw: none state: running
Partition:
ID-1: / raw-size: 96.27 GiB size: 94.2 GiB (97.85%) used: 8.17 GiB (8.7%) fs: ext4 dev: /dev/sda1
maj-min: 8:1 label: nixos uuid: c6aa65e5-20f5-4722-9510-35db58c5af20
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: partition size: 3.73 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2
maj-min: 8:2 label: swap uuid: d400b2ac-83c0-4c53-8cb5-a03ec321f13c
Unmounted:
Message: No unmounted partitions found.
USB:
Hub-1: 1-0:1 info: full speed or root hub ports: 6 rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1
mode: 2.0 chip-ID: 1d6b:0002 class-ID: 0900
Device-1: 1-1:2 info: Adomax QEMU Tablet type: HID driver: hid-generic,usbhid interfaces: 1
rev: 2.0 speed: 480 Mb/s (57.2 MiB/s) lanes: 1 mode: 2.0 power: 100mA chip-ID: 0627:0001
class-ID: 0300 serial: <filter>
Hub-2: 2-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 chip-ID: 1d6b:0001 class-ID: 0900
Hub-3: 3-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 chip-ID: 1d6b:0001 class-ID: 0900
Hub-4: 4-0:1 info: full speed or root hub ports: 2 rev: 1.1 speed: 12 Mb/s (1.4 MiB/s) lanes: 1
mode: 1.1 chip-ID: 1d6b:0001 class-ID: 0900
Sensors:
Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon or lm-sensors.
Repos:
Packages: pm: nix-default pkgs: 0 pm: nix-sys pkgs: 586 libs: 91 pm: nix-usr pkgs: 0
No nix channels found for user: adam
Processes:
CPU top: 5 of 139
1: cpu: 200% command: ps pid: 91670 mem: 3.94 MiB (0.1%)
2: cpu: 91.5% command: .inxi-wrapped started-by: perl pid: 91666 mem: 37.6 MiB (0.9%)
3: cpu: 8.5% command: fish pid: 91659 mem: 9.56 MiB (0.2%)
4: cpu: 2.7% command: sshd-session: pid: 91655 mem: 12.2 MiB (0.3%)
5: cpu: 0.1% command: [rcu_preempt] pid: 16 mem: 0.00 MiB (0.0%)
Memory top: 5 of 139
1: mem: 175.1 MiB (4.4%) command: systemd-journald pid: 312 cpu: 0.0%
2: mem: 47.2 MiB (1.2%) command: journalctl pid: 852 cpu: 0.0%
3: mem: 37.6 MiB (0.9%) command: .inxi-wrapped started-by: perl pid: 91666 cpu: 91.5%
4: mem: 33.5 MiB (0.8%) command: nix-daemon pid: 90861 cpu: 0.0%
5: mem: 16.2 MiB (0.4%) command: systemd pid: 1 cpu: 0.0%
Info:
Processes: 139 Power: uptime: 9d 4h 18m states: freeze,mem,disk suspend: s2idle wakeups: 0
hibernate: shutdown avail: reboot,suspend,test_resume image: 1.52 GiB Init: systemd v: 260
default: multi-user tool: systemctl
Compilers: gcc: 15.2.0 Client: shell wrapper v: 4.7.1 inxi: 3.3.40